AMA Pro Racing: Polypropylene Rear Motor Mounts Now Part Of Official XR1200 Race Kit

AMA Pro Racing: Polypropylene Rear Motor Mounts Now Part Of Official XR1200 Race Kit

© 2011, Roadracing World Publishing, Inc.

Categories:

AMA Pro Road Racing Technical Bulletin #2011-02 To: All AMA Pro Road Racing Competitors Date: April 5, 2011 Effective Date: Immediately Subject: XR1200 Engine Mounts and Number Plates 7.11 Engine Modifications c. The following modifications are allowed: i. Air filter may be replaced with Vance and Hines air filter as provided, no exceptions. p.n. #71009 ii. Exhaust may be replaced with Vance and Hines exhaust as provided, no exceptions. iii. Fuelpak ECM management must be used as provided, no exceptions. Stock ECM and stock ECM calibration must be used. iv. The oil cooler is allowed to be relocated for better protection. The provided oil cooler relocation kit must be used, no exceptions. v. Protective engine covers must be used where applicable. The intent is to eliminate fluid leakage in the event of an impact. vi. OEM gauge cluster may be replaced with Vance and Hines Display (p.n. 35-9027), no exceptions. vii. XR1200-O2 Sensor Eliminator Kit for use only with 61015 Fuelpak p.n. 31003 viii. Screamin’ Eagle Clutch Spring p.n.37949-98A ix. Non-stock clutch plates, fibers and steel x. XR1200 Polypropylene Rear Motor Mount P.N. 35-0260 xi. The following Vance and Hines Kit, part number 35-9040, must be used in its entirety, unmodified. The above motor mounts (2 required) can be ordered from the Vance and Hines Race Shop at 317-852-9057 or [email protected] . Availability will be starting April 5, 2011. Please note that a release will need to be downloaded, signed and returned to V&H before parts can be shipped. The release is located here; ~http://www.vhmotorsports.com/Motor-Mount-Release.pdf~ ~http://www.vhmotorsports.com/Motor-Mount-Release.zip~ Dealer / Race Team pricing $31.25 each ($62.50 per set) NUMBER PLATES: Please note that the new front plate/ side decals are ready to ship. Due to a change in the AMA Pro logo, these plates will be required for Infineon. #35-0207- XR 1200 Front Number Plate Decal #35-0203- XR1200 Clutch Side Seat Decal #35-0202- XR Throttle Side Seat Decal V&H will provide the decals to each entrant at no charge (excludes freight).

Latest Posts

Riders Heading To Jerez For FIM Intercontinental Games

Riders from countries around the world are heading to...

SRX Named Dunlop Eastern Race Tire Distributor

Rancho Cucamonga, CA: Dunlop Motorcycle Tires is proud to...

MotoAmerica: Racer/Chassis Tuner Kyle Ohnsorg Tests Talent Cup Racebike

Talent Cup: Kyle Ohnsorg Tests The Krämer APX-350 MA By...

REV’IT! Posts Contingency for 2025 MotoAmerica Talent Cup

REV’IT! Sport USA Announces Contingency Program for 2025 MotoAmerica...

MotoGP: Acosta Tops Crashes In 2024

"This is normal," Pedro Acosta said in his post-Barcelona...